Since1980
Örnek Metin
Örnek Metin
Örnek Metin

FEATURES

Number of Servo Controlled Axis : 7
Max. Number of Mountable Stacks : 4
Max. Bendable Tube Length : 3750 mm(With Mandrel)
Max. Tube Feeding Length : 2800 mm (One Time)
Max. Bending Radius : 120 mm
Radius Difference Between Two Dies: 38 mm (Max.)
Max. Bending Angle : 190 Deg
Bending Speed : 236 Deg / sec
Feeding Speed : 2000 mm / sec
Rotation Speed : 450 Deg / sec
Bending Tolerance/Repeatability : +/- 0.05 ~ 0.1 Deg
Feeding Tolerance/Repeatability : +/- 0.05 ~ 0.1 mm
Rotation Tolerance/Repeatability : +/- 0.05 ~ 0.1 Deg
SB-32X7A-2S-V-U CNC Controlled Right And Left Head Tube Bending Machine

- Right+Left CNC tube bending machine with electric Servo Control in all axes
- The bending head, specially designed for products that are difficult to bend and have a high risk of collision, by moving clockwise and counterclockwise in the same bend.
- Seven (7) Axis Electric Servo Control
- Feeding
- Rotation
- Bending
- Horizontal Movement of Bending Head
- Rotation of Bending Head
- Movement of the Pressure Die (3 sets)
- Movement of Clamping Die
- Ability to bend both Draw Bending and Roll Bending.
- By its ability to 180 degree rotation of the Bending Head, 6 different radius of bending can be made with the dies on both sides of bending head.
- Each part (stack) on the bending die is designed to be used for both Roll Bending and Draw bending.
- Electric Servo controlled axes have separated speed control for each ones and perfect synchronization of simultaneous movements are provided.
-
Able to bend either chuck open or clamped for every bend.
- Perfect bending with servo bending and clamping dies
- The Movable Machine Control unit provides great ease of use to the operator.
-All electrical circuits and components are mounted in specially designed protective cabinets with safety in mind, and the connection for the safety mat can be added(Security Mat can be added as an option)

CAPACITY
Round Tubes - Mild SteelØ32 x 1.6t (CLR=1.5xOD)
Round Tubes - Stainless Steel Ø30 x 1.0 t (CLR = 1.5xOD)